Product Overview
NON-SLIP ADDITIVE
Seal ‘n Lock Textured Polymer Additive is a virtually invisible non-slip traction additive for paints, sealers and other coatings. Seal ‘n Lock Textured Polymer Additive adds needed texture to coated surfaces to increase safety and help inhibit slip and fall accidents, especially when wet.
All Seal ‘n Lock products are made of the most environmentally-friendly products available, and offer excellent weatherability, UV protection, and help prevent algae and mold. All of our cleaning and sealing products and specialty coatings are VOC compliant in all 50 states and exceeds all hardscape product manufacturer’s minimum standards guidelines.
NON-SLIP ADDITIVE IS AVAILABLE IN 8-OUNCE CONTAINERS.
NON-SLIP ADDITIVE BENEFITS:
What sets this specialized polycarbonate grip apart from other non-slip additives is it’s durability and optical clarity. When suspended in a clear coating, the particles become virtually invisible and will not distort or discolor patterns or graphics. It is also extremely durable and chemical resistant. The addition of Seal ‘n Lock Textured Polymer Additive to a coating can easily increase the abrasion resistance of that surface by up to 50%.
Seal ‘n Lock Textured Polymer Additive is resistant to most acids, alkalis, solvents, grease, oil, gasoline, jet fuels, hydraulic fluids, detergents and alcohol. These qualities explain why this is the texturing agent used on the decks of ships and aircraft carriers around the world.
- Increases Traction
- Reduces Slip & Falls
- Adds Texture
- For Paints, Coatings and Sealers
HOW TO APPLY
Add Seal ‘n Lock Textured Polymer Additive to sealer, paint or coating. One container (8 oz) to 5 gallons of diluted sealer is the average loading, but more or less can be used, depending on desired texture, type of coating used and number of coats to be applied.
If using Seal ‘n Lock Textured Polymer Additive in a simple single component coating, it is not recommended to add it to the first coat. Apply first coat according to the manufacturer’s instructions without Seal ‘n Lock Textured Polymer Additive to prime the surface and establish the strongest bond possible. After the first coat has dried according to the manufacturer’s instructions, additional coats can then be applied with Seal ‘n Lock Textured Polymer Additive added.
Always apply to a test area before application to ensure texture, appearance, adhesion and compatibility are acceptable. All non-skid additives may shorten the life of the film to some degree.
